New 620C skidder debuts in Arkansas
The new 620C skidder, with its enhanced hydrostatic
drive system, was well received at the In-Woods Demo in Arkansas. Tigercat will
again display the machine at upcoming Expo Richmond in June.
PARIS, ON, May 8, 2004 – The Tigercat 620 series skidder has
been redesigned for enhanced performance and improved fuel efficiency. The
result is the new 620C, a quicker and more powerful machine than the original
620. Well suited both to selective thinning and clear fell applications, empty
travel speed and pulling speed has been increased.
The engine has been upgraded to a 205 hp (153 kW) Cummins QSB5.9 Tier II.
The engine house is roomy and uncluttered with convenient access to daily
maintenance points. Like the 630C, the tilting cab provides access to the
hydrostatic pump stack, motors and driveline. The pre-cleaner is housed inside
the engine compartment. The engine house roof profile is smooth and free from
obstruction. Visibility is exceptional.
The computer control system is identical to the 630C. Parker’s IQAN system
governs all machine functions. It is robust and well designed. Benefits include
integrated troubleshooting and simplified maintenance and repair. Hydraulic
pilot lines are eliminated. Full horsepower can be put to the ground for higher
pulling speeds. The precise nature of the foot pedal and joystick controls is
further enhanced.
The hydrostatic drive system is an operator’s dream; a smooth ride with no
gear shifting –- just forward and reverse drive pedals. The 620C can operate
with variable engine rpm for reduced fuel consumption. The operator can set the
minimum engine rpm depending on terrain conditions or run at constant rpm for
severe terrain conditions. The operator can also limit maximum speed for
increased machine control in tough terrain.
Inside the cab, the seat and joystick controls are rotated 40° to the right
for reduced neck strain and an improved view of the load. Grapple and arch
functions are controlled by one joystick. The cab is insulated and isolation
mounted with a high output heater/air conditioner. There are clear sight lines
along both sides of the engine house, to the rear wheels and to the grapple
area. The machine is available with a single or dual function arch and 12
or 14 sq.ft. (1.1/1.3 m2) grapple options.
The center section is backed by a 3-year 6,000 warranty. It’s built with thick
steel plate, oversized pins and tapered roller bearings. All pivots are line
bored for precise pin fit.
About Tigercat
Tigercat Industries designs and manufactures premium quality forestry and
off-road equipment with manufacturing facilities in Canada and Sweden and
world-wide distribution. The diverse forestry line includes complete full-tree
and cut-to-length harvesting systems.
Tigercat and the Tigercat logo are registered
trademarks of Tigercat Industries Inc. Other brands and product names are
trademarks of their respective owners. Copyright (c) 2001-2004 Tigercat Industries
Inc.
# # #
Download high resolution 620C image
(CMYK jpg; 1259 KB)
(Right-click and choose "Save target as" to save image to your
local hard drive)
Contacts:
Paul Iarocci, Tigercat
Industries Inc.
519-442-1529 Ext. 314
email: piarocci@tigercat.com