More service tips
Engine Maintenance
Check the engine oil level prior to starting the engine.
When starting the engine, let it run at idle for 2–3 minutes to
allow oil pressure to build for proper lubrication and to allow components
to reach operating temperature. Never run an engine at full RPM
immediately after starting.
When stopping the engine, always let it run at idle for 3-4 minutes
before shutting it down. This will ensure proper lubrication and even cool
down of all components. Failure to do so could result in premature turbo
failure.
Care of Polycarbonate Windows
Rinse with lukewarm water.
Using a soft cloth or a sponge, gently wash the panel with a mild
solution of soap or detergent and lukewarm water. Do not scrub or use
brushes or squeegees.
Rinse with clean lukewarm water.
Dry thoroughly with a chamois or moist cellulose sponge to prevent
water spotting.
Compatible cleaning agents include: Aqueous solutions of soaps and
detergents, Formula 409, Top Job, Freon T.F., VW&P grade Naphtha, Joy
Windex with Ammonia D, Palmolive liquid soap.
Do not use any abrasive or highly alkaline cleaners, benzene,
gasoline, oil, acetone or carbon tetrachloride.
Do not clean polycarbonate windows in direct sunlight.
|
