Products

LH845E Harvester
The LH845E is an efficient, high performance leveling harvester with limited tail-swing and outstanding service access.
Find a DealerOverview
Purpose built for full time forest duty, the LH845E harvester offers many advantages over excavator conversions — better harvesting head performance, more durability and higher performance on steep slopes. The durable design and construction starts with the Tigercat-built forest duty undercarriage and large diameter swing bearing. The upper assembly is built on a thick, one-piece turntable.
ER technology and optimized hydraulics
The ER boom system is highly productive and efficient in high cycle small stem harvesting applications. The combination of high horsepower and harvester head optimized hydraulics provide the operator with responsive control, quick feed speed and powerful delimbing capability for high performance and productivity. Learn more about ER
Service access
The clamshell style retracting roof enclosure provides excellent access to the engine house. A swing-out door on the right side of the machine allows the operator to easily access daily engine service points.
Tigercat power. Tigercat support.
The H845E harvester is Tigercat FPT Tier 2 or Tier 4f powered. The Tier 4f engine conforms to the latest emissions standards in North America and Europe. With the Tier 2 engine configuration, Tigercat brings the benefits of Tigercat power and support to harvesting professionals around the world. Learn more about Tigercat FPT
Key Benefits
- Tigercat FPT N67 engine with Tier 2 or Tier 4f emissions compliance – clean, powerful and efficient; fully supported by Tigercat
- Optional long-reach ER® telescopic boom system for reduced travel and ground disturbance
- ER boom technology® improves fuel efficiency, reduces operator fatigue and increases productivity
- High capacity cooling system – automatic variable speed for improved fuel efficiency; automatic reversing cycle to purge dust and debris
- Heavy duty Tigercat-built F8 forestry undercarriage – excellent stability, ground clearance and tractive effort
- Extreme duty leveling system – massive pins and cylinders and thick steel plate throughout
- Large air intake area at the rear, away from saw discharge, for reduced debris build-up
- Clear access to pumps, valves and engine; far superior to excavator conversions
- Large front-entry cab – floor to ceiling front windshield with side door access to expansive area behind the seat
Videos
Downloads
See below related files that you can download.
- The truth about Tier 4
- The truth about Tier 4 (385.56 Kb)
Photos
LENGTH less boom | 4 900 mm |
WIDTH | 3 430 mm |
With optional narrow undercarriage | 3 000 mm |
HEIGHT | 3 730 mm |
GROUND CLEARANCE | 685 mm |
WEIGHT less attachment | 34 925 kg |
34 925 kg | |
TAIL SWING RADIUS | 2 665 mm |
ENGINE Tier 4f | Tigercat FPT N67 Tier 4f 212 kW (284 hp) @ 2,200 rpm (rated) 212 kW (284 hp) @ 2,200 rpm (peak) |
ENGINE Tier 2 | Tigercat FPT N67 Tier 2 205 kW (275 hp) @ 2,100 rpm (rated) 212 kW (284 hp) @ 2,000 rpm (peak) |
AIR FILTRATION | Precleaner and 2-stage engine air cleaner |
COOLING | Aluminum side by side radiator, oil cooler and charge air cooler Removable intake debris screen |
FAN | Hydraulically driven, automatic variable speed, reversible |
FUEL CAPACITY | 800 L |
DEF CAPACITY Tier 4f | 80 L |
LOW RANGE | 1,8 km/h |
HIGH RANGE | 4,2 km/h |
PUMP, MAIN | Piston |
PUMP, HARVESTER | Piston |
PUMP, COOLING FAN | Piston |
FILTRATION | (5) Spin-on, 7 micron full flow (1) Water absorbing |
CYLINDER, HOIST | 130 mm (5.2 in) bore |
CYLINDERS, STICK | (2) 110 mm (4.3 in) bore |
CYLINDERS, LEVELING | (2) 180 mm (7 in) bore |
HORSEPOWER CONTROL | Electronic speed sensing All-speed antistall |
RESERVOIR | 190 L |
TRACK FRAMES | R7-163L heavy-duty leveling Integral track guides/ramp angles |
TRACK CHAIN | FH400 215 mm (8.5 in) pitch |
FINAL DRIVE | (2) Piston motors with brake valves Infinitely variable speed |
TRACTIVE EFFORT | 367 kN |
GEARBOX | Triple reduction planetary type with brake |
FRONT IDLER | Hydraulic track adjuster Spring shock absorber |
SLIDES, UPPER | Replaceable, bolt-on |
ROLLERS, LOWER | (10) FH400 single/double flange excavator type |
TRACK SHOE | 610 mm (24 in) single grouser |
Optional | 710 mm (28 in) single grouser |
LEVELING | 20° forward; 6° rear; +/-17° side |
TRACK | Friction disc Automatic spring applied, hydraulic release |
SWING | Friction disc Manual spring applied, hydraulic release |
SWING DRIVE | 7 rpm variable speed 360° continuous rotation Double reduction, swing drive planetary gearbox with brake Piston swing motor |
SWING BEARING | 1 190 mm (47 in) ball circle diameter |
ENCLOSURE | Hydraulically operated, retracting roof Hinged access doors for engine and pump stack Rear air intake for cooling system and engine |
MAXIMUM CUT RADIUS | 8 210 mm |
MINIMUM CUT RADIUS | 3 540 mm |
BARE PIN LIFT full reach | 4 090 kg |
MAXIMUM CUT RADIUS | 9 230 mm |
MINIMUM CUT RADIUS | 3 360 mm |
BARE PIN LIFT full reach | 3 495 kg |
MAXIMUM CUT RADIUS | 11 310 mm |
MINIMUM CUT RADIUS | 3 375 mm |
BARE PIN LIFT full reach | 2 675 kg |
LEVELING | 20° forward; 6° rear; +/-17° side |
BATTERY | (2) 12 v |
ALTERNATOR | 110 amp, 24 v |
SYSTEM VOLTAGE | 24 v |
LIGHTING | (14) LED (4) LED service lights, engine enclosure |
LIGHTING, Optional | High output LED lighting package |
CAB | Insulated, pressurized and isolation mounted A/C, heater, defroster skyVIEW and rearVIEW camera system Full length polycarbonate windshield/entry door Polycarbonate right and left side windows One-piece polycarbonate side door window with steel guarded upper sliding section for ventilation AM/FM digital stereo and auxiliary input port Bluetooth® audio and hands-free calling (2) Power points |
SEAT | Full suspension air ride, fully adjustable with angled mounting, heated and cooled Armrest mounted Tigercat joysticks |
OPERATOR CONTROLS | Hydraulic proportional for boom/travel/swing with electronic travel speed control limiter Electronic for leveling and telescopic boom Electric switch for swing brake Electronic control system with colour LCD display screen for machine monitoring and function adjustment |
STANDARD | Flexible hydraulic system to accept various harvesting heads |
STANDARD | Fuel suction strainer Alarm for track movement |
OPTIONAL | Cold weather kit Bolt-on tool box R7-163L-N (narrow) undercarriage Electric hydraulic oil fill pump RemoteLog® telematics system |