WIDTH maximum | 1 645 mm |
WIDTH minimum | 1 446 mm |
HEIGHT less rotator and link | 1 545 mm |
BASE WEIGHT less rotator and link | 1 700 kg |
OPERATING WEIGHT | 1 800 kg |
OPERATING PRESSURE recommended | 300 bar (4,500 psi) |
REQUIRED FLOW maximum | 300 L/min (82 US gpm) |
REQUIRED FLOW minimum | 270 L/min (71 US gpm) |
CHAIN OIL CAPACITY | 16 L (4.2 US gal) |
MAIN SAW UNIT standard | Hultdins Supercut™ 100S with auto-tension, proportional lubrication, saw limiting |
CHAIN | 10 mm pitch |
BAR standard | 820 mm |
MAXIMUM CUT | 715 mm |
BAR Optional | 900 mm |
MAXIMUM CUT | 785 mm |
MAIN SAW UNIT optional | Hultdins Supercut™ 150 with auto-tension, proportional lubrication, saw limiting Convertible chain pitch |
CHAIN | 19 mm pitch |
Optional | 10 mm pitch |
BAR standard | 820 mm |
MAXIMUM CUT | 715 mm |
BAR optional | 900 mm |
MAXIMUM CUT | 785 mm |
TOP SAW | (Optional) Hultdins Supercut™ 100S with auto-tension, proportional lubrication, saw limiting |
CHAIN standard | 10 mm pitch |
BAR standard | 670 mm |
MAXIMUM CUT | 560 mm |
DRIVE SYSTEM | Triangulated wheel arms Locked 3WD |
ARM DRIVE MOTORS | (2) 620 cc |
Optional | (2) 750 cc (2) 520 cc |
PEAK FEEDING SPEED | 5 m/s |
With optional motors | 4,2 m/s 6 m/s |
FRAME DRIVE MOTORS | (2) 400 cc |
Optional | (2) 500 cc (2) 315 cc |
FEED WHEELS | 10.5 mm (0.41 in) V-Tec |
Optional | 20 mm (0.8 in) thumbnail Eucalyptus debarking 20 mm (0.8 in) alpine 11 mm (0.43 in) skeleton 30mm (1.2 in) thumbnail |
FEED WHEEL maximum opening | 780 mm |
KNIVES | (4) Delimbing (2) Fixed |
FRONT KNIVES TIP OPENING | 750 mm |
FRONT KNIVES minimum diameter | 45 mm |