Skip to content

The Full Package

BTB catches up with Sunshine Logging Ltd. after the Kaslo, British Columbia based company purchased two Tigercat 850 processors, each equipped with the Tigercat 568 processing head.

– Samantha Paul

Clint with youngest daughter and equipment operator Julia.

Clint with youngest daughter and equipment operator, Julia.

Sunshine Logging is based in the West Kootenay region of British Columbia, Canada – located among picturesque snowcapped mountains on the western shore of Kootenay Lake.

Clint runs three five-piece crews with twenty employees. Each crew has a feller buncher, shovel logger, skidder, processor and loader.

Clint started hand falling, line skidding and yarding after high school. In 1989 he started working for Sunshine Logging. Nine years later he purchased half the business, and in 2018 took full ownership. His wife Vanessa manages the books and keeps everything in order. Clint’s oldest daughter Kelsey runs the company’s safety program and helps out in the office. His youngest daughter Julia operates equipment, currently working on the road-building side of the business.

850 processor working at the landing

Both Clint and Dave comment on the improved righthand side visibility due to the hooked boom profile.

Logging in the Kootenays

Sunshine Logging has a one-year renewable harvesting contract with Kalesnikoff Lumber Company based in Castlegar and a contract with Porcupine Wood Products out of Salmo. He also buys timber on private land. “It is a bit of a mix,” says Clint. “That is what the Kootenays has going for it, we still have a log market here. We still have multiple mills. We don’t have one big licensee in the area running the whole show.”

Typical terrain in the Kootenay region is quite steep. The forests generally are mixed stands of fir, hemlock, cedar and spruce, known as ‘Kootenay Mix.’ “Right now we’re harvesting a 30 hectare [74 acre] tract of Kootenay Mix for Kalesnikoff Lumber Company,” says Clint.

The new iron Sunshine Logging received British Columbia’s third and fourth 850 processors – both equipped with the new 568 harvesting head. Clint was tired of playing tug of war between the carrier and head with his processing equipment. “Tigercat is a good product and I was attracted to the full package,” explains Clint.

The gear was purchased through Inland sales specialist Jason Quaife out of Cranbrook. With the new Inland dealership in Castlegar, Sunshine Logging will now be serviced by this location. “Castlegar is ramping up. They have hired some new mechanics – it’ll be good for us having a closer branch.”


– Clint Carlson, owner, Sunshine Logging Ltd.

Clint ordered the 850/568 packages in April 2019 and subsequently toured the Tigercat plant in Ontario the following month. “I was impressed. It’s amazing what they’re doing there. It’s a factory with a customer touch,” says Clint. “A lot of the factories I’ve been to, they’re mass-producing excavators. You’re just getting what everybody is getting. You walk into Tigercat and you can see your machine. There’s a good chance I was climbing through the frame of our 850 when it was still steel,” tells Clint. “As for the head, I think we determined we were watching ours being built when we were there.”

“I’m fully aware that we are in a bit of a prototype phase when you get the first of anything, but I wasn’t worried,” Clint says. “If any problems do come up, Tigercat has always been good about bringing that improvement back to us. And it’s not my first early Tigercat. I bought a brand new 870C buncher in 2005 and we had two early L870s before that.”

The full package - the Tigercat 850 and 568.

First impressions

Sunshine Logging’s first 850 processor with the Tigercat 568 harvesting head arrived onsite in January 2020. Clint wanted a head that could work efficiently in both 20 cm (8 in) pine and 70 cm (30 in) fir. “It is a big factor,” says Clint.
“We were worried the head was going to be a bit small since we do push 30-inch wood. The whole thing is getting the right size head to be efficient in both.”

Clint provides some feedback on the machine thus far. “The swing on it is really good. I definitely notice a difference from the previous excavator-style carrier. The twin swing drive is a lot better,” he says. “The saw is a lot faster cutting than on excavator conversions, which is saving time, and it’s actually producing a better product. We’re getting less ladder check,” explains Clint. If the saw cuts too slow and there’s tension in the log when it cuts, it tries to break it, and it will leave splits. Because the saw is cutting faster, it is more of a clean cut. This is especially important as the wood gets bigger. Clint also commented on how the righthand side visibility has improved due to the hooked main boom profile. “It was always a blocked view with the straight style boom,” he says.



– Dave LaMarsh, 850/568 operator, Sunshine Logging Ltd.


850/568 processor operator, Dave LaMarsh.

850/568 processor operator, Dave LaMarsh.

Dave LaMarsh

Operating the first machine Sunshine Logging received is Dave LaMarsh. Dave has nineteen years of experience operating equipment, including experience with different brands and multiple processors. Dave comments on the processing performance. “It doesn’t matter if the logs are eight inches or 30 inches, it just pulls them through effortlessly,” Dave asserts. “It’s set up nice. The way the head hangs makes it easy for picking. The length and diameter reading is really good. The length of the logs have not varied two inches from what the reading is telling you,” adds Dave. “The heated seat is awesome and the visibility with the bent boom is way better. Overall it’s much better than a regular excavator. That is for sure.”

850/568 processor operator, Kerry Gouldsborough.

850/568 processor operator, Kerry Gouldsborough.

Kerry Gouldsborough

The second 850/568 processor package arrived the first week of February and is operated by Kerry Gouldsborough. At the time of visit, the machine had accumulated 120 hours. This is Kerry’s first Tigercat. “It’s fast,” he claims. “I really like it. It’s way quicker than I expected. I find the operating station really comfortable. It’s a small cab but when you’re sitting in there, it’s actually quite comfortable.”

“I’m surprised at how big of a piece I can run through that head. I have run logs up to 30 inches through it,” tells Kerry. “I haven’t had to work on the carrier yet but I like how everything is contained. Everything is airy and it opens up well. There is good access to the centre of the machine and all the way around it.”

“Because it’s purpose-built, your functions are a lot better,” states Kerry. On his previous processor, if the head was having an issue, it basically eliminated the rest of the hydraulic system. “You had to wait for the head to finish before you could do anything. It didn’t multi-function as well as the new package. With this, you don’t have that issue,” adds Kerry. “Other guys that have run the Tigercat brand all say they’re great. So I was actually quite excited to be getting it, especially brand new, straight out of the box.”


568 harvesting head

Increased productivity, it’s unanimous

Clint, Dave and Kerry have all noticed an increase in productivity since getting the new machines. “We’re early on, but I think for sure we will see an increase,” says Clint. “We just haven’t got past all the visitors,” he laughs. The crew hasn’t been able to run at full capacity for several weeks due to all the interested people coming out to see the machines in action.

Clint wanted the full Tigercat package and is very happy with his decision. “At the end of the day, the two work better together since they’ve been designed and tested together.”

The 850/568 processing cliffside

The 850/568 processing cliffside


Click the link below to watch the associated video on Tigercat TV.


Related Content


568 Prototype Report

Tigercat representatives along with an Australian customer group made the trek to Meadow Lake, Saskatchewan in August to have a look at the prototype 568 harvesting head purchased and currently being tested by Brander Enterprises.

Tigercat Releases 850 Processor

Tigercat introduces the highly anticipated 850 roadside processor.

Roadside Processing with the 850 and 568

Watch the 850 processor equipped with the 568 operating cliffside in the Kootenay region of British Columbia. The 850/568 package provides contractors with an all-Tigercat roadside processing solution.

Related Products