| WIDTH maximum | 1 645 mm |
| WIDTH minimum | 1 446 mm |
| HEIGHT less rotator and link | 1 545 mm |
| BASE WEIGHT less rotator and link | 1 700 kg |
| OPERATING WEIGHT | 1 800 kg |
| OPERATING PRESSURE recommended | 300 bar (4,350 psi) |
| REQUIRED FLOW maximum | 300 L/min (82 US gpm) |
| REQUIRED FLOW minimum | 270 L/min (71 US gpm) |
| CHAIN OIL CAPACITY | 16 L (4.2 US gal) |
| MAIN SAW UNIT standard | Hultdins Supercut™ 100S with auto-tension, proportional lubrication, saw limiting |
| CHAIN | 10 mm pitch |
| BAR standard | 820 mm |
| MAXIMUM CUT | 715 mm |
| BAR Optional | 900 mm |
| MAXIMUM CUT | 785 mm |
| MAIN SAW UNIT optional | Hultdins Supercut™ 150 with auto-tension, proportional lubrication, saw limiting Convertible chain pitch |
| CHAIN | 19 mm pitch |
| Optional | 10 mm pitch |
| BAR standard | 820 mm |
| MAXIMUM CUT | 715 mm |
| BAR optional | 900 mm |
| MAXIMUM CUT | 785 mm |
| TOP SAW | (Optional) Hultdins Supercut™ 100S with auto-tension, proportional lubrication, saw limiting |
| CHAIN standard | 10 mm pitch |
| BAR standard | 670 mm |
| MAXIMUM CUT | 560 mm |
| DRIVE SYSTEM | Triangulated wheel arms Locked 3WD |
| ARM DRIVE MOTORS | (2) 620 cc |
| Optional | (2) 750 cc (2) 520 cc |
| PEAK FEEDING SPEED | 5 m/s |
| With optional motors | 4,2 m/s 6 m/s |
| FRAME DRIVE MOTORS | (2) 400 cc |
| Optional | (2) 500 cc (2) 315 cc |
| FEED WHEELS | 10.5 mm (0.41 in) V-Tec |
| Optional | 20 mm (0.8 in) thumbnail Eucalyptus debarking 20 mm (0.8 in) alpine 11 mm (0.43 in) skeleton 30mm (1.2 in) thumbnail |
| FEED WHEEL maximum opening | 780 mm |
| KNIVES | (4) Delimbing (2) Fixed |
| FRONT KNIVES TIP OPENING | 750 mm |
| FRONT KNIVES minimum diameter | 45 mm |
20 September 2024
Tigercat releases lower weight class 544 harvesting head for track carriers.
27 June 2022
Download the D7 control system brochure. Discover how you can get the most out of your TCi harvesting head.
