Resources
Tigercat Releases Harvesting Head for Wheel Carriers
04 May 2022
The 534 is a robust, high performance harvesting head well matched to the Tigercat 1165.
| WIDTH maximum | 1 645 mm |
| WIDTH minimum | 1 446 mm |
| HEIGHT less rotator and link | 1 545 mm |
| BASE WEIGHT less rotator and link | 1 450 kg |
| OPERATING WEIGHT | 1 550 kg |
| OPERATING PRESSURE recommended | 300 bar (4,500 psi) |
| REQUIRED FLOW maximum | 300 L/min (82 US gpm) |
| REQUIRED FLOW minimum | 270 L/min (71 US gpm) |
| CHAIN OIL CAPACITY | 16 L (4.2 US gal) |
| MAIN SAW UNIT standard | Hultdins Supercut™ 100S with auto-tension, proportional lubrication, saw limiting |
| CHAIN | 10 mm pitch |
| BAR standard | 820 mm |
| MAXIMUM CUT | 715 mm |
| BAR Optional | 900 mm |
| MAXIMUM CUT | 785 mm |
| MAIN SAW UNIT optional | Hultdins Supercut™ 150 with auto-tension, proportional lubrication, saw limiting Convertible chain pitch |
| CHAIN | 19 mm pitch |
| Optional | 10 mm pitch |
| BAR standard | 820 mm |
| MAXIMUM CUT | 715 mm |
| BAR optional | 900 mm |
| MAXIMUM CUT | 785 mm |
| TOP SAW | (Optional) Hultdins Supercut™ 100S with auto-tension, proportional lubrication, saw limiting |
| CHAIN standard | 10 mm pitch |
| BAR standard | 670 mm |
| MAXIMUM CUT | 560 mm |
| DRIVE SYSTEM | Triangulated wheel arms Locked 3WD |
| ARM DRIVE MOTORS | (2) 620 cc |
| Optional | (2) 750 cc (2) 520 cc |
| PEAK FEEDING SPEED | 5 m/s |
| With optional motors | 4,2 m/s 6 m/s |
| FRAME DRIVE MOTORS | (2) 400 cc |
| Optional | (2) 500 cc (2) 315 cc |
| FEED WHEELS | 10.5 mm (0.41 in) V-Tec |
| Optional | 20 mm (0.8 in) thumbnail Eucalyptus debarking 20 mm (0.8 in) alpine 11 mm (0.43 in) skeleton 30mm (1.2 in) thumbnail |
| FEED WHEEL maximum opening | 780 mm |
| KNIVES | (4) Delimbing (2) Fixed |
| FRONT KNIVES TIP OPENING | 750 mm |
| FRONT KNIVES minimum diameter | 45 mm |
04 May 2022
The 534 is a robust, high performance harvesting head well matched to the Tigercat 1165.
